Auto Break Repair - Bleeding brakes

Posted by admin on November 11th 2008 to Auto Repair School

Hi there, welcome back to auto repair site. Today we are going to see how to change brakes of your car. The method is very easy, yet installs the breaks in minutes. Lets check how it works. You can refer the video posted here. This video briefly describes how to change the break fluid as well. Not only that, the narrator has also suggested which type of break fluid should be use. Overall, a useful video.

Welcome to my video, today I am going to bleed the brake system. I am going to show on one wheel. The break system is located here behind the rubber foot. This is the rubber foot. We going to need ten millimeter open wrench, since I am using a cursive wrench. The first thing you really need to do is, get a socket a 10 millimeter ratchet, to directly loosen the brake valve bleeding system. Let’s get started in loosening the system.

Okay the second stuff is to get somebody to go in a car. My assistant is going in the car. He will step on a brake, when assisted to do so. We going to loosen the blot again, loosen bolts, press, and release. Repeat this as many as times, as necessary. We are going to press on braked when I say go. Go, release. Go, release. Go, release. Go, press, release. Press, release. Press, you can just hear about the air bubbles. Keep doing this as many times as possible. Continue to keep pressing and releasing the brake pads and, you always going to check, to refill the break fluid, as just to keep getting smooth. Get break fluid, as needed and always check and see to get gear in align.

So everybody enjoy doping break bleeding. It is very simple as 1 2 3. You can start with furthest rare wheel and the driver wheel and then you work on the passenger front wheel and driver’s front wheel. This concludes who to bleed the break service. Always use O3 Honda break fluid. OEM recommended thank you for viewing my video enjoy.

Tags: , , , , , ,

Tags

Comments are closed.