How to Install Wiper Inserts Pt.3

Table of contents for How to Install Wiper Inserts

  1. How to Install Wiper Inserts
  2. How to Install Wiper Inserts Pt.2
  3. How to Install Wiper Inserts Pt.3

Another piece of rubber and a little guide, now on your wiper arm this piece right here goes in that big guide right there at the other end are little locking tabs they are sharp, so if you’re not careful and you run your hand cross this you will hurt yourself.

I know- I’ve done that. Now to install the wiper insert all you do is get it lined up… that’s the hard part… okay, double check your other side both sides are in the groove, you just slide it down and you got a whole bunch of them you’ve got to line up, make sure your metal goes in. Alright now these here just keep the metal rods in place so I’m going to slide one down and slide one off and you just keep installing all the way down the wiper blade and remove this and watch them sharp little hooks and get it through the last one and once you’re through the last one all you have to do is pinch and pull and you’ll hear it snap into place, you see how both my locks are in place that way the wiper blade can’t move.

Now that you’ve got your insert installed all you have to do is install the wiper arm again and remember it just clips right in and you hear a snap that’s how you install an insert.

In case you didn’t see the video in part 1 of this series… here it is again.

Tags: , , , , , ,

Tags

Comments are closed.