Changing Your Own Wiper Blades Pt.2
Table of contents for Changing Your Own Wiper Blades
- Changing Your Own Wiper Blades
- Changing Your Own Wiper Blades Pt.2
- Changing Your Own Wiper Blades Pt.3
Hello I am Mark Collin. I am going to show you how to fit the award winning TP performance wiper blades, to ensure squeak free, streak free, crystal clear vision in minutes.
Well there are instructions on the side of the box it’s not easily readable. So I am going to show you how to fit the TP performance blades. Lift the wiper arm up, turn the blade, squeaks the whole fitting and slide off the fitting. And that’s your wiper blade removed. Make sure the arrow is pointing up con your blade. Take the plastic fitting and push it in to the clips against the pin. Insert and push. Slide the arm through the blade and just simply pull the open hook to the arm and turn the blade.
Thoroughly clean your glass with a powerful glass cleaner. Ordinary glass washer does not remove the grease on the screen. Your wiper blades need exactly ninety degrees to the screen. If an arm is very slightly twisted this is enough to make the blade jointed and squeak. So make sure that the blade is ninety degrees if not then slightly very slightly twist the arm by fraction and it will put the correctness without having the need to buy new arm.
In case you didn’t see the video in part 1 of this series… here it is again
This is part of a series of posts, you can read the rest of it by clicking on the links for the Table of Contents at the top of this post.
Tags: sears auto repair, mechanics tools, auto glass repair st louis, car roof repairs, auto repair phoenix, car starter repair, auto glass repair
Tags
